The Lite3DP Gen 2 3D Printer builds on the success of its predecessor. With a brand new and improved design, an ESP32 microcontroller changing the Arduino Professional Mini, and a number of other different enhancements, the Lite3DP Gen 2 is well-suited for making small, detailed resin prints.
It’s barely bulkier than the Lite 3DP S1 3D printer however continues to be compact sufficient to suit right into a bag. Gen 2 has been designed to take care of backward compatibility with the older mannequin, and house owners of current Lite3DP printers can use the Gen 2 dev equipment to improve their printers.
The resin 3D printer is totally open-source (firmware, {hardware}, and software program), and you should use the schematics, Gerber recordsdata, code, and different assets hosted within the GitHub repository to construct a special sort of mSLA resin printer.
Lite3DP Gen 2 key options & specs:
- Electronics – All-in-one PCB with ESP32 microcontroller, high-res LCD, an ultra-silent TMC2209 driver for the Nema 8 stepper motor, and different parts
- Firmware: Arduino
- Expertise – MSLA // LCD-SLA
- Decision – XY: 0.115 mm; Z: 0.025, 0.05, and 0.1 mm
- Construct quantity (W x L x H) – 36.7 x 48.8 x 80 mm
- Tray quantity – 50 cm³ for the liquid resin
- Appropriate resins – All UV 405 nm resins (commonplace, industrial, versatile, castable, dental, and many others.)
- Print pace – as much as 40 mm/h
- Knowledge enter – micro SD card autonomous operation
- Misc – Buttons, capacitive contact buttons, passive warmth dissipation, touchscreen
- Energy Provide – 12 V, 5.5×2.1 mm, ≥1 A)
- Energy consumption – lower than 10 W
- Dimensions – 100 x 100 x 167 mm
- Weight – 470 grams (16.6 oz.)
The Gen 2 resin 3D printer doesn’t have the prettiest specs and have listing. Nonetheless, its open-source nature means it will be simpler to restore, preserve, and customise than the industrial choices out there. It is usually cheaper than the options, at $229 for the pre-assembled product and solely $115 for the dev equipment. That excludes the delivery charge, $8 to america and $18 to the remainder of the world.
Lite3DP Gen 2 launched on Crowd Provide final November and funding will finish on Dec 21. In case you are on this mini, open-source resin 3D printer, you’ll be able to place an order on Crowd Provide for both the total printer or the dev equipment.
Tomisin is a author specializing in {hardware} product evaluations, comparisons, and explainers. He’s very enthusiastic about small kind issue and single-board computer systems
Help CNX Software program! Donate by way of cryptocurrencies or change into a Patron on Patreon